31 Jul 2007

Britain's Bad Housing

Andrew Gilligan does not like builders. It’s fine to have prejudices, but does that warrant being given an hour of prime time Channel 4 Dispatches to conduct a personal hatchet job on them? On the one hand, it’s good to have well-known faces like Gilligan getting to grips with the serpent that is the UK housing scene: on the other, it would be refreshing to have a guide without such an obvious axe to grind, one who is prepared to give a little airtime over to the housebuilders to defend themselves. Whilst it seems relatively easy for career journalists to get the opportunity to make programmes for the likes of Dispatches, I have yet to see anything on terrestrial TV that shows how life is on the other side of the trenches.

Gilligan certainly didn’t pull any punches. He started with a stiff jab to the mid-riff: he took Stephen Nancarrow, of Inspector Home, with him around a Bryant estate and literally pulled it to bits. It made for good knock-about TV, but Nancarrow admitted it was possibly the worst example of finishing that he had come across. As it is his job to uncover sloppy finishing, it did rather rather smack of being a fit-up. Presumably 99.9% of new homes are better than these, but that of course didn’t get mentioned. Instead the NHBC got lampooned for passing these admittedly shoddy homes.

Then it was the turn of Greenwich Millennium Village and the problems some of the residents have had with noise issues between flats. Whilst it was conceived as an exemplar development, it is often forgotten that it was built to the pre-2003 Part E noise standards. As was pointed out by the NHBC in the builders defence, the development met the regs in force at the time, it was just that the regs were inadequate. Who is culpable for that? The builders? The NHBC? Or the government? For Gilligan, there was no question. It had to be those big, greedy developers and their tame lackeys in the NHBC. Me? I’m not so sure.

Not that the government got off scot free. There was the obligatory laugh at John Prescott who was shown showing off his £60,000 house. Gilligan nipped up to Allerton Bywater in Yorkshire to find that they were for there, for sale, for a minimum price of £225,000. QED: Prescott’s an idiot. Strange for me to be riding to his defence, but not even John Prescott ever thought that a house that cost £60k to build would sell for £60k.

The restless Gilligan then rode on to dig up some underhand dealings by St George in Fulham. To help get their Imperial Wharf development up and running, a PR firm was hired to fake letters of support to local councillors. Even worse was afoot in Manchester, where a lobby group, Media Strategy, was hired to help lower the affordable housing targets set by the North West plan. And some accusations of bribery were re-aired against developers gifting money to the Labour Party: apparently you can get away with this as long as the gifts are not to individuals. What struck me was how small the amounts involved were. £5,000 to get to develop a casino site? You’d lose that much on a good night at the tables. Gilligan’s implication was that the whole development scene was corrupt from top to bottom and that the feeble planners were in the pay of the developers.

Gilligan’s tactic was to dig up dirt wherever he could find it. His point seemed to be that Britain’s housebuilders are useless, greedy and corrupt, whilst their political masters are stupid and naïve. As essays go, it hung together well, and made for compelling viewing. It is just that his basic premise was a little lazy. It’s all very well reducing the debate down to a reworking of the old 70s Marxist them’n’us routines, it’s just that reality has an annoying habit of being a whole lot more complex to understand. There is a very different story waiting to be heard from the housebuilders, but you won’t ever come across it on Dispatches.

The best contribution to the show came from Paul Finch, once editor of the Architects Journal, now a CABE commisioner, who pointed out that the big problem here is that the government has abdicated responsibility for affordable housing to the private housebuilders. It is something this blog has touched on recently too: we are in unknown territory here.

Gilligan didn’t concern himself with these niceties; nor did he stop to question whether an affordable housing programme was the correct solution to our current problems, which is strange because he wrote a thoughtful piece about this in the Evening Standard recently, questioning the assumption that we can build our way out of our housing problems. His sole interest in this programme seemed to be to bash the housebuilders. At the end of the show, the landbank issue was raised: you could spend a whole hour on this topic alone and still not get to the bottom of it. Kelvin Macdonald of the RTPI was interviewed and tried to give a reasoned assessment of the issues involved, but Gilligan simply didn’t want to hear it and concluded the interview with the statement that builders are deliberately holding back land in order to keep prices high. As they say, never let the truth get in the way of a good argument.

I guess I am nitpicking. As a sometime builder, my hackles do still rise just a little every time the London media gets housebuilders in their sights. Because the result is always the same: a bloody televisual massacre. I suppose I shouldn’t be so sensitive; hunting housebuilders is good sport and, let’s face it, they are so thick-skinned that the odd bit of bad publicity never did any of them any harm. I don’t suppose Tony Pidgley even bothered to watch it, so I don’t see why I should get the hump. It’s just that halfway through Gilligan’s piece, I had the strong sensation that I had seen this same programme before several times over, and it was not the one I wanted to watch anymore.

Bogus private sales

One of the many irksome features of an estate agent’s life is the vendor who apparently withdraws their property from the market, only to complete a private sale shortly afterwards with a purchaser who the agent had introduced. Most contracts expressly forbid such delinquent behaviour on the part of the vendors, at least for a significant time period, but it can be hard to enforce any penalty as the details of the house sale are kept private. It is estimated that anywhere between 1 in 10 and 1 in 4 withdrawn properties go on to complete the deal privately, thus denying the estate agent their contracted fee.

Now the Land Registry is offering a service specifically aimed at estate agents wanting to keep tabs on what happens to withdrawn sales. For a small monitoring fee, the Land Registry will contact the estate agents with details of completed sales on their withdrawn properties. If the contract terms have been breached, the agent will then have a relatively easy task to reclaim their fee.

If you want to know more about this scheme, contact David Lockett at the Land Registry in Coventry.

29 Jul 2007

How housing demand is assessed

The housebuilding lobby insists that demand for new homes is outstripping supply, and that this has been the case for many years, decades even. But whilst it is fairly straightforward to measure housing supply, how is demand assessed?

One place to look is Kate Barker’s review into the state of UK housebuilding. Her brief was to look at supply side issues but she does acknowledge that the relationship with demand is complex. She makes the crucial point that simply increasing the supply of new homes may in itself affect demand: Higher rates of housebuilding could also lead to higher household formation rates. (Barker Report 1.43). But she doesn’t really explore these issues in any depth.

A more fruitful area to dig in is the work of the Cambridge Centre for Housing and Planning Research. They have produced various pieces of research on housing need and housing demand. One piece in particular, More Households to be Housed: Where is the increase coming from? by Alan Holmans and Christine Whitehead, is very pertinent and seems to set out the methodology for how these figures are calculated. Which is:
• work out how many more old people there are going to be
• work out how many more broken families there will be
• work out what net migration levels will be.

The answer habitually comes out at something like 215,000 extra households per annum. So this figure is taken as the basis of housing demand. And if we build less than this each year (we do), this is responsible for the shortage of housing and, it follows, the increase in house prices.

But dig down into Holman’s and Whitehead’s report and you can begin to uncover a number of assumptions and guesses that call into question the accuracy of their work.

• whilst it is easy to measure the marriage rate and the divorce rate, because each event is recorded, there are no accurate figures for co-habiting couples, nor for what happens to couples (both married and co-habiting) once they separate. How many couple up again? No one knows, they just guess.
• migration rates: everyone knows that the amount off net migration in the past few years has been enormous, but no one knows just how enormous. Not until the 2011 census will there be any hard figures to go on, and even then, it is widely anticipated that illegal migrants will mostly not appear on the census
• longevity: we are as a population living longer and the models build in an assumption that life expectancy rates will continue to increase at the rates they have done over the past century. But will they? Again, no one has a clue.

But even if their assumptions are correct, there is still a fundamental flaw in the way their demand figure is arrived at. It’s all just too mechanistic: the model makes no allowance for the fact that demand is itself affected by supply. The size of the average household has been falling consistently ever since records began, but does this represent a profound social change or is it simply a reflection of the fact that there are far more houses around now and, given the choice, many people would prefer to live on their own or in small units. Back in Victorian times, it was not unusual to have families of seven, eight or nine living in two-up, two-downs. For them, this was normal; for us it would be seen as appalling overcrowding.

What this demonstrates is that our standard of living has increased and we now expect to share bedrooms with no more than one other person. And without setting a notional accommodation standard for the country as a whole, how is it possible to determine whether our housing demand is real or just aspirational. If our aspirations are to live in smaller and smaller household units, then we cannot hope to meet demand until such time as everybody has a house of their own. Or maybe two. Why not?

So demand as it is now defined will remain unquenchable. If we were to be building, say, 300,000 new homes a year, rather than 180,000 that we manage at present, we would simply be the moving the goalposts and would fine that the demand for new homes had inexplicably risen to 350,000 a year. And probably work out all manner of household formation statistics as if to prove it. The tail appears to be wagging the dog.

So behind this lies a debate which has yet to be started. The subject is this: Is it the responsibility of government to provide a home for everybody who wants one? And does this include everyone who pitches up on our shores in future? Or do we now have to accept that that there must be limits to household growth, and learn to adapt to what we already have?

Insulation sales up just 5%

Picked up this intriguing snippet from someone who works for Sheffield Insulation, our largest supplier of insulation for the construction industry. He said that insulation sales were up by about 5% as a result of the changes brought about in 2006 by Part L revision. In theory, they should have increased by a lot more.

Also on a similar theme, a prominent boiler manufacturer tells me that sales of non-condensing boilers, which should have been kicked into touch for all time by Part L changes, are in fact holding up well. Many installers are still quite happy to fit whatever the householder wants. As far as the replacement boiler market is concerned, Part L compliance is optional, as there is no way of enforcing it.

24 Jul 2007

The Housing Green Paper: an idiot's guide

If you are anything like me, you will feel no excitement at all at the prospect of having to read yet another government initiative on housing. You sort of know what’s going to be in them and the prospect of wading through 130-odd pages of badly written, self-congratulatory twaddle is enough to make any grown man groan. I’m no different.

However, thanks to the miracle of pdf, I have done a numbered word search, which will enable you to weigh the import given to various key words, from which you can deduce everything you need to know about this document. Here follows the number of times each of these words or phrases appear in the document:

Planning 288
Affordable 235
Sustainable 161
Mortgage 124
Design 121
Supply 108
Green 89
Rural 72
Social Housing 58
Demand 52
Eco-town 51
Flooding 40
Brownfield 35
Zero carbon 28
Shared Ownership 27
Children 22
First time buyers 18
House Prices 17
Barker 16
Regional Spatial Strategies 14
Key worker 9
Section 106 6
Delivery Vehicles (and they are not talking about vans) 5
Green Belt 4
Lifetime Homes 4
Crime 3
Buy to Let 2
Self build 1
Gardens 1
Immigration 0
Fire 0
Sound 0
Neighbours 0
Detached 0

23 Jul 2007

On Affordable Housing

We are going to hear a lot in the next few days about Affordable Housing. It’s at the very centre of the government’s agenda for the future of housebuilding in the UK, as set out in the Green Paper. It sounds like a vaguely worthwhile concept but when you get down to examining the details, the whole concept is littered with inconsistencies and problems.

Take the very word affordable. What does it mean? Behind it lies a wider idea that housing generally has become unaffordable to all but the richest sectors of society; this is pretty much self-evident to anyone living in the South-east of England at the moment. But just what should be done about it? There are lots of policy options out there from doing nothing right through to nationalising all land. Somewhere in between these two extremes are many tax incentives and/or penalties which could be used to make home ownership more or less attractive.

The government’s chosen response is to push for more subsidised housing (with the subsidies coming from the developer’s profits, not taxpayers’ money). But is it right to build a subsidised housing sector at all? We’ve been here before and it didn’t work too well last time. Subsidised housing adds to the social divide and makes another one of the government’s key objectives, social mobility, even less likely. There are other options. In egalitarian Sweden, they don’t have any social housing: instead, they subsidise rents for people in housing need. This way they neatly avoid building ghettos of housing for the poor.

There is another problem that has so far not been discussed, as far as I am aware. Affordable housing schemes are largely financed by money taken from the theoretical profits made by developers on their private market housebuilding activities. This is governed by the so-called Section 106 agreements, the bane of every housebuilder’s life. However, it follows that the very existence of our affordable housebuilding programme has now become dependent on there being lots and lots of new unaffordable housing. And the more expensive it gets, the better it is for the affordable housing sector, because more profit can be creamed off from the housebuilders.

Thus we are creating a paradox similar in many ways to the government’s stance on drinking and smoking. Whilst we are constantly being told what grief these awful habits cause, the NHS itself is hooked on their tax revenues. So it is with social housing. Whilst the government and the local authorities keep saying something must be done about the affordability crisis, they now have a vested interest in keeping ordinary housing unaffordable, because that’s the only way they can deliver affordable homes.

The whole housebuilding sector is slowly becoming a sham, a modern day version of Robin Hood economics. First make the rich even richer by restricting the supply of building land; then rob them blind to build homes for the poor.

18 Jul 2007

The Little Known History of the Vapour Barrier

Like many aspects of building physics, vapour diffusion first became the subject of academic study because there was a problem that needed both an explanation and a solution. The story is told in fascinating detail in William Rose’s book Moisture in Buildings. The problem was first noticed in the 1930s by American house painters engaged on painting the external timber claddings, or sidings as they call them, which were and still are so prevalent there. They reckoned that they were getting more problems and more call backs on jobs where the walls had been insulated. Ergo, there was something about adding insulation to the walls that was causing the paint on the wall sidings to peel, crack or whatever.

Now, in the 1930s, placing insulation in walls was a relatively new idea and the businesses making insulation were keen to see that this new business venture wasn’t killed off by complaints from painters before it had got going. So they set out to investigate.

The obvious conclusion would have been that the insulation had the effect of making the external face of the walls colder, because less heat was coming through from the house, and that the timber claddings would be therefore be subject to more frosts and more dew, and these actions would combine to shorten the life of any paint treatment.

But that wouldn’t have been a helpful conclusion for the insulation industry, because there would be absolutely nothing they could do about it. Instead a number of researchers, notably Larry Teesdale of the US Forest Products Laboratory and Frank Rowley of the University of Minnesota, came up with an alternative explanation based around the idea that water vapour will tend to diffuse through solids, from the warm, relatively humid internal atmosphere inside a house, towards the outside where the vapour pressure was demonstrably lower. Diffusion theory it was called. Rose comments in his book that “diffusion theory was proposed as the explanatory mechanism not because it was validated or shown to explain the observations, but because it was analogous to conductive heat flow, which Rowley was most familiar with.”

In other words, the building scientists had already created a model for walls where the heat was shown being conducted through the wall, and drawn diagrams of how the temperature gradients were likely to look through a wall. Now they could do the same thing with vapour pressure. In 1938, Rowley produced a seminal paper which drew both a temperature gradient and a vapour pressure gradient through a wall section. He then went on to carry out tests in laboratory wall assemblies, funded by the US Mineral Wool Association.

Rowley was able to demonstrate in his climate chamber that vapour diffusion was taking place and that, critically, condensation could also occur if the conditions allowed. How closely his climate chamber reflected what actually happens inside houses is a matter of debate: for one thing, Rowley took great pains to eliminate the effects of both radiant and convective heat transfer, because the whole theory rested on comparing the rates of heat conduction with vapour pressure. Rowley’s conclusion was that the problems that the house painters had been experiencing with wet claddings could be eliminated by stopping vapour diffusing into the wall assemblies.

The story is eerily reminiscent of the recent debates about the testing of multifoils. When the multifoil manufacturers test, they get a positive result: when the competition tests, the results are negative. Back in the 1930s, there was no competition and the results of Rowley’s theories and tests became enshrined in the building codes throughout the world. The fact that his research was being funded by insulation manufacturers, who had a vested interest in its outcome, was overlooked.

Because Rowley had unearthed a mathematical model for how moisture would behave in a wall, the chances of condensation occurring could now be calculated according to a formula including internal and external conditions, and the permeability of the materials. In essence, the conclusion of his work was that the damaging effects of moisture build-up in walls would be eliminated if a vapour barrier was fitted on the warm side of the wall.

The fact that his initial experiments were carried out in conditions very different to the typical house wall was ignored. In testing for vapour diffusion, he deliberately eliminated the effects of heat transfer by convection, radiation and air movements. He was also only measuring the airborne water vapour in the air: the far bigger reservoir of bound water in the materials was overlooked, possibly because it wasn’t generally understood at the time.

The Americans call Rowley’s theory the profile method. In Europe, it is referred to as the Glaser method after a German researcher who undertook a similar series of experiments in the late 50s. They are predicated on the idea that vapour will diffuse, unimpeded, through solid objects and that at a certain place, if the conditions are right, the vapour will reach a dew point and condense. Rose writes: “This impression is decidedly incorrect. The principle criticism of the profile method is this: it cannot detect types of moisture problems other than those related to diffusion. An informal survey among building scientist colleagues seems to indicate that diffusion-related moisture problems account for less than 1% of moisture problems found in buildings. We have been seriously side tracked by the emphasis the profile method has received in the last 50 years.”

Yet this analysis of how we should build timber framed wall and roof assemblies still lies at the heart of our building codes. BS5250 is the relevant standard which informs our building regulations and its Condensation Risk Analysis, which it suggests is carried out on timber frames structures, is still in essence the same calculation which Frank Rowley worked out in 1938. Despite there being a huge amount of work out there now which contradicts Rowley’s original research, the profile method, and the resulting use of the vapour barrier, are still seen as essential components of good building practice.

The fact that the profile method is nearly irrelevant can be demonstrated by a simple experiment, as described by Rose. Take two sealed jamjars. The first is left empty, the second has a small piece of wood placed in it, about the size of an ice cube. Sensors are placed in the jamjars measuring both temperature and relative humidity. The jamjars are then gently heated. In the first jam jar, just as you would anticipate, the relative humidity level falls because the amount of water vapour present is unchanged but warmer air is capable of carrying more water vapour. The second jam jar sees a very different result: the relative humidity level increases. Why? Because bound water present in the timber is driven out by the higher temperature. It is a simple demonstration that shows just why the traditional view of how water vapour behaves inside a house is misguided.

The American building science community is at long last getting code-making bodies like ASHRAE to take on board the study of moisture loading and to allow calculations of safety levels for this new approach to moisture management. In the UK, the expert on these issues is Chris Saunders, who works at Glasgow Caledonian University. He authored an interesting paper for the BRE on moisture modelling in buildings (IP2/05) where he points out the inadequacies of the traditional Condensation Risk Analysis. The problem, from a practitioner’s point of view, is that what actually goes on inside a wall assembly is far more complex than the profile method makes out, and this does nothing to make modelling any simpler. There are some more sophisticated predictive models around which take into account air movement, porosity, water sorption coefficients and other factors, but they don’t always give clear answers and sometimes, in the case of many timber frame wall designs, the answers are not so very different from the original profile method answers. So although we now know a lot more about the workings of water vapour in buildings, it hasn’t made their design any easier.

In particular, just the role of the vapour barrier is cast into doubt, the requirement for effective air barriers has come into focus. Vapour barriers? Air barriers? Are they really so different? It would appear not. The basic routine for both is polythene sheeting, placed directly behind the plasterboard, only an air barrier has to be far more carefully constructed than a vapour barrier. Whilst we can now see that Rowley’s vapour diffusion theories were misguided, it doesn’t appear that it is going to make a huge difference to the way we construct timber frame walls and roofs.

16 Jul 2007

Our Planning Application in - at last

153 days. That’s what it’s taken us to put a planning application together for our new house, pictured here. If that seems like a long time, I would hazard that it is much longer than most people spend on it.

In fact, when Oliver Rehm, the architect who heads up the Baufritz UK operation, signed us up for their design service back in February, he thought that we could have completed the design side in a month. The fact that is has taken so much longer is largely down to our prevarications and to a feeling that we really don’t want to start changing our minds after the application has gone in. Having been telling people not to for so long, now I have been hoist by my own petard.

The deal so far is that Baufritz are charging us £6,000 for the design work. If and when we get a successful planning permission sorted, we then negotiate Part Two of the contract, which is the build. In fact, there is no obligation to go with Baufritz for Part Two, but it would in all likelihood take some sort of falling out for us to part at this point. This aspect of building a prefabricated German house is surprisingly daunting: the fact that you have to make gob-smackingly large financial decisions at the outset is just a bit frightening. It’s not quite like buying an expensive car when you can compare the prices between showrooms: a one-off house is just not like that. All we really had to go by was that the ballpark figure Baufritz had quoted at us was £1500/m2 internal floor area, not including foundations. I needed to see if this figure did actually transfer across to the house we have designed — and designed quite deliberately to be simple and easy to build.

When Oliver produced a 32-page costing file with a total almost exactly around this figure, base on the designs we had agreed, then one of my main fears was allayed. Now I don’t know whether Baufritz will be able to hang onto this £1500/m2 figure for long: timber prices are rising for the first time in my lifetime, it would seem, and Baufritz houses are mostly timber. But I think it shows that they are a good bunch of people to deal with. In fact I knew that from the moment I first met them last year, but it’s always nice to have your first impressions confirmed.

That’s not to say there haven’t been one or two hiccups along the way. I am still holding fire on their claims to be building Carbon Positive houses: they have shown me their calculations and I think they are conveniently missing off the carbon contributions from items that they don’t supply, principally loads of concrete going into the foundations. And it’s not at all clear to me that carbon captured inside timber (which is the basis of their carbon positive claims) has really been sequestered. More like held captive for the duration of the life of the house. But the claim certainly has some merit, if only in that it gets you thinking about the carbon footprint of something as large as a new house.

I was also surprised to see that the standard roof panels are only 200mm thick, as compared with the 400mm thickness of the wall panels. This makes quite a difference to the U values. Whereas the wall scores as low as 0.16, down at Passive House levels, the roof is 0.22, which barely scrapes through our current building regulations. For something selling itself on being a low energy house, this seems an unlikely oversight. Baufritz offer an upgrade, adding more insulation to bring the roof U value down to 0.16, but this is charged as an extra.

But these are quibbles. Overall I am still delighted with the service we have received thus far and the standard of the product that they deliver. As well as having now visited their factory and showhouse in Germany twice, I have seen their first UK house being erected in Cornwall, as well as having been shown around the showhouse they built at the Grand Designs show last month. So I am bit-by-bit getting familiar with the whole process and the product they make.

And the 153 days it has taken so far? What Oliver said to us back in February was that we could have a completed house to move into 32 weeks after we have obtained planning permission. That’s amazingly quick, by anybodies standards, and, as we don’t really want to be moving in till summer 2008, there hasn’t been a load of angst about “hurrying on” and “getting started” which I know bedevils most British selfbuilds. So we’ve taken our time, gone through no less than five versions of how the house might look and tried to think through all the different options before submitting plans. It’s still a very difficult process, because you can really only ever go so far with plans and computer animations: you have to take a leap of faith that everything will be alright and I know from experience that it never quite is. But I think it’s been 153 days well spent so far.

12 Jul 2007

Libeskind and Embodied Justice

I am always interested in where people come from and I was fascinated to hear world famous architect Daniel Libeskind, at a Shape East event in Cambridge this evening, discoursing on his youth in Poland, where he was born in 1946. He described being taken into the centre of Warsaw by his parents where there was only one tall building, which was the HQ of the Communist Party. It gave him a feeling of dread.

The connection with tall buildings and power has stuck with him. He doesn’t mind tall buildings, it’s totalitarianism that upsets him. He said he has turned down project after project in China because he doesn’t like the regime. He’d much rather tussle with the problems of tough assignments, none more so than his designs for Ground Zero in New York. His original design for the Freedom Tower was to have been 1776 feet tall, to reflect the year of American Independence. He calls it embodied justice.

Incidentally, by my reckoning he looks rather like Elton John, but he talks more like Woody Allen. That alone makes him quite a draw. He doesn’t appear to have got his first commission until the age of 43 but has signed off over 25 major projects since. In terms of global impact, he is now only rivalled by Frank Gehry. They have a lot in common but, whilst Gehry is known for his impossible curves, Libeskind is all about unfeasible angles and shards of light. They have both achieved fame and success through designing iconographic museums, which then went on to be commercially successful. Now he is inundated with requests from developers who want to build shopping malls that look like off-the-wall museums, hoping to add cultural significance to the shopping experience.

11 Jul 2007

Anyone for an air source heat pump?

This man is Peter Ferguson and he'd like to sell you one. He owns and runs Trianco, the Sheffield-based, metal bashing oil-fired boiler maker. I spent a couple of hours with him on Monday, listening to his tale and sharing his dreams and aspirations.

Oil boilers are a mature market. There are perhaps a million of them dotted around the country, mostly in out of the way locations where mains gas can’t reach. Each year, 60,000-odd new ones get installed, mostly as replacements. Trianco have a slug of this market, around 10%, but it’s not growing. Oil boilers, just like solid fuel boilers before them, would seem to be yesterday’s technology. Even with the recent move over to condensing boilers, there doesn’t seem to be much mileage left here for long term growth plans.

The question is what will replace them. The world and their aunt are all harping on about renewables and carbon-free or carbon-lite power systems. With climate change slowly moving centre stage, it’s hard not to conclude that this is where the future lies. But there is still a lot of doubt as to which of the new technologies will succeed and which will fall by the wayside.

Ferguson reckons he’s spotted a market gap here and thinks that Air Source Heat Pumps (ASHP) may just be the next big thing. ASHP are the smaller and lesser known relative of the ground source heat pump (GSHP) which has, in contrast, had quite a lot of attention in recent years. ASHP differs from GSHP in three crucial respects:
• it doesn’t require digging up the garden and rolling out 100s of metres of tubing
• instead it works by taking heat out of the air
• it’s cheap compared to GSHP and to all the other green power systems.

To date, people have thought of heat pumps primarily as space heating devices. Ferguson’s Eureka moment came when he saw that it would be beneficial to position ASHP against solar thermal panels, as an alternative method of delivering hot water for the tap. Instead of spending maybe £3,000 or more installing solar panels on your roof, which, if you were lucky, would deliver just over half your hot water requirements throughout the year, here is a solution which would cost half this price and which would provide all your hot water. Because it’s a heat pump, it delivers around three times the energy it requires to run it, so potentially you could draw off say your 4,000kWh of hot water (typical of a modern household of four) for an outlay of just 1250kWh, cost around £100 a year.

He is particularly interested in the small ASHP units, which are rated at 3kW output. The one in the photo I took is the larger 5kW one, so you can imagine that the 3kW one is almost half this size. Crucially, it is small enough to fit through the average loft hatch, and this in itself opens up a whole new market for heat pumps — small houses without gardens. The unit can get plumbed into the loft where the air temperature will, in any event, be a little higher than outdoors, and in about two hours a day it will be capable of delivering 150lits of hot water, enough for a couple of people. It’s not a renewable power source, as it uses electricity, but because the way heat pumps work, it will use about a third of the electricity an electric immersion heater would use, so it will deliver 6kWh of heat energy for just 2kWh of juice burned.

Will it catch on? Well, it may do. The one thing that makes Ferguson very bullish about his ActivAir heat pumps is that he can sell them for £695 + VAT. Compare that with solar panels (at around £2,500), or indeed any of the other renewable or carbon-lite technologies, and you can see that his ASHP units may well find a new market.

The downsides are that the units are a little on the noisy side to be happily operating indoors. And the recovery rate, the time taken to replenish your hot water cylinder, is rather slow. The 3kW unit would take over two hours to recover, as compared with 30 minutes for a similar-sized cylinder heated by a conventional boiler.

There is also the cost calculation to run through. Although ASHP will deliver three units the heat output for every one unit of electricity required to operate it, that electricity is always going to be more expensive than mains gas. And if the mains gas is a third of the price of mains electricity, then your cost saving vanishes. As it stands, mains gas is rather more expensive than this at the moment, but not by a lot, so the running cost saving is there, but only just. Unless of course you manage to run your ASHP unit on Economy 7, in which case it becomes very cheap to run indeed. But then you’d have it whirring away for a couple of hours every night whilst you slept. If you mounted it correctly, you wouldn’t hear a thing, but it would always be a concern that it could keep you awake.

Trianco’s ASHP units are available in larger sizes. As well as the 3kW output, there are 5kW, 7kW and 12kW. This largest size is capable of taking on GSHP as a whole house space heating solution. Many people feel that it’s got to be less efficient than GSHP because outside air temperatures are habitually lower than winter ground temperatures, but Ferguson’s units work at good efficiencies down to —3°C, which is about as cold as it gets in southern England these days. And at £1895, it is way cheaper than any GSHP unit I have come across.

At the moment, Ferguson is importing his ActivAir units from China, but has high hopes of bringing the metal bashing and assembly functions in house as sales demand rises. It’ll be fascinating to see whether he manages to establish ASHP as a serious contender for the future of home heating. It won’t be for a lack of trying.

10 Jul 2007

Eco Bollocks Award: Dept Communities and Local Govt






















As part of its widespread review of our energy saving strategy, the government published a paper in November 2006 called the Review of Sustainability of Existing Buildings. It’s a critical issue both for national policy and for the homeowner seeking to reduce their fuel bills and their carbon footprint.

Buried within this document is a table, which lists 13 energy saving measures that can be carried out on existing homes, together with a breakdown of costs, payback periods and energy saving potential. It makes startling reading for anyone considering a house renovation. The most effective measure is listed as providing insulation for your hot water cylinder, at a cost of just £14 and an annual saving of £29: in contrast, the least effective thing you can do is switch from single glazing to double glazing, something which will cost you around £4,000 and will only save £41 a year.

However, as a guide to what to do, this table is horribly flawed and contains a number of glaring errors. The single worst of which is that the savings suggested are not cumulative: if you added together a basket of measures you might take to refurbish a house, the savings appearing in this table come to more than the total energy usage of the house before any renovation has taken place. Clearly that is a nonsense. For instance, whilst installing an A-rated boiler might just save you £168 a year if you took no other energy saving measures at all, this saving reduces dramatically when you insulate the loft, the walls, fit double glazing and draft proofing, not to mention providing a hot water cylinder with an insulated jacket. Whilst this might appear to be blindingly obvious, it appears to have escaped the attention of the authors of this report, who use this saving rate to calculate the potential for energy saving throughout the whole country, simply by multiplying the potential saving in each home by the number of homes without A-rated boilers, some 17 million.

It gets worse. There are some frankly unbelievable figures in here. The amount of saving from solid wall insulation (as opposed to cavity wall filling) is down at £380 a year. Seeing as the average gas bill for an average house (which this is supposed to be modelled on) is between £500 and £600 a year, which includes heating domestic hot water and cooking, as well a boiler loses (by not having that A-rated boiler, estimated at around £168, remember), they are claiming that you will virtually eliminate your space heating bills by applying solid wall insulation around your house. Writing as someone who once did this exercise, I can assure you that this will not happen!

The micro wind turbine appears in the table with a saving of £224 a year. I have no idea where this figure comes: even the very generous estimates provided to us by the manufacturers don’t suggest that a wind turbine can provide more than 1,000kWh of electricity a year, which is worth about £120 (if you have a particularly penal tariff!). Actual returns from micro wind turbines fitted are coming in at far less than this: indeed several have been fitted thus far that have yet to produce any electricity at all. So how the table manages to come up with a 10.5 year payback I have no idea.

It’s not much better with photovoltaic solar panels. The table suggest that for an outlay of £9844 (before grants), you can hope to make a saving of £212. That sort of money will buy you nearly 10m2 of panels which should, if you are lucky, produce around 1,000kWh per annum. To buy this at 9p/kWh would cost you £90, so unless you are buying electricity at a whopping 21.2p per hour it’s hard to see how you would obtain a saving of £212.

The ground source heat pump example isn’t any better. For a start, they are not really recommended in properties that aren’t already heavily insulated and have comparatively low heating demand, ideally delivered by underfloor heating. It’s not something you should consider powering a house with no loft insulation, no wall insulation and single glazing. No way. But the authors of this report are suggesting that it could be used in 17 million homes (that’s every one with a garden) and that it could save a tonne of carbon emissions in each one, saving the residents £368 on their gas bills. Phoey. Whilst ground source heat pumps have their place, and may reduce gas bills substantially, they do it by racking up rather large electricity bills instead (especially in uninsulated homes!). This seems to have completely escaped the report writers.

So please handle this information with care. I know it’s not intended to be guidance for the individual homeowner, but if it was accurate there is no reason why it shouldn’t be used as such. But it’s not accurate. Not at all. If that’s the standard of the advice the government is getting about this issue, then heaven help them in their drive towards a low carbon economy.

6 Jul 2007

How I became a Moisture Maven

When we built our house in 1992, ventilation was one of the things I knew next to nothing about. We just went along with the suggestions of our designer and business partner at the time, Robin Gomm, combined with the wisdom of our electrician. We went conventional, which meant that our windows came installed with trickle vents and our wet rooms had the standard extract fans installed.

Now I never liked those pesky trickle vents. It seemed to me that they either did nothing at all or they blew a gale through them. There didn’t seem to be much in between. Bit by bit, one at a time, I started closing them off — they are the type that has a hit and miss slider that enables you to close them. After a few years, they were all closed. It really didn’t seem to make any difference to the way the house felt or smelt.

Then one day about seven or eight years ago, the fan in the en-suite bathroom cut out. It has been strategically mounted in the ceiling directly above the shower, and it was connected to the outside via a duct going up through the attic above and out via a vent tile in the roof. Up until then, I had religiously turned the fan on everytime I took a shower and my first thought when it broke was “Must get that fixed at once.” But, of course, a fan in your ensuite bathroom isn’t exactly a life and death issue so I left it for a few weeks. And I watched to see what difference it made.

The answer was none at all. This is what set me thinking about ventilation, relative humidity levels and whether our present routines make sense. Here we had a fairly small, enclosed space, our ensuite bathroom, with no trickle vent open and no extract fan, and yet even in the depths of winter, there was no problem at all with excess humidity. Showers throw off a lot of water vapour and we typically find that the window and the mirror will mist up after a shower, but within a few minutes it’s all gone and everything appears to be normal once more. And having trickle vents open and fans on didn’t appear to make the demisting appreciably quicker.

At this point, I went out and bought some hygrometers. They were only simple little greenhouse-style ones, costing two or three quid, but they served my purpose. It turned out that the relative humidity levels in the house tended to settle at around 50% to 60% throughout most of the year. After a shower, the levels would rise to 80%, sometimes near 90%, but they would settle back down within fifteen or twenty minutes. If the door remained closed, it would stay humid much longer, but if the bathroom door was left open, the humid air would seem to mix with the dryer air and the normal humidity levels returned very quickly. All without any obvious ventilation at all.

But there was another unexpected consequence of my data logging. According to classic water vapour theory, the reason the inside of houses have a higher absolute humidity level than the great outdoors is because we live in them. We not only shower, but we breathe, sweat, cook and wash. We produce water vapour by the proverbial bucketload.

So if we are responsible for all this water vapour, it should stand to reason that if you take us away for a few days, the humidity levels in the house should fall back into equilibrium with outside. And by equilibrium, we are referring to a state where the vapour pressure indoors matches that outdoors. This would suggest that in winter, the indoor relative humidity levels should fall back to around 25% or 30%. Use the accompanying chart to work out the difference between absolute and relative humidity levels.

So what happens when we go on holiday or away for the weekend and remove the source of all this water vapour? Relative humidity indoors doesn't fall at all, it sticks at the 50% to 60% background level that occurs when we are in residence.

There must be some unanticipated processes at work here. It could be that our house is so badly built that it self-ventilates through the fabric and therefore my findings are irrelevant. But that wouldn’t explain why the humidity levels remain higher indoors than outside even when we are away. I suspect that it’s got a great deal to do with the moisture buffering idea that I have been going on about in recent posts, but moisture buffering is a hard thing to measure, so my theory has to remain untested. Bearing in mind that there is about 100 times more bound water in the structure and furnishings in a house than there will ever be free floating water vapour in the air, my guess is that there is a sort of natural evaporation/absorption rate inside a house, which is largely determined by temperature, the humidity and the moisture content of the surrounding materials, and that the materials are capable of altering their moisture content without us ever being aware of it. In short, the house acts a bit like a sponge, soaking up and giving off water as conditions dictate.

Only where you have bathrooms made up of entirely non-porous materials do you start to get problems with condensation. Or when you let the temperature of a room fall below dew point, somewhere around 12°C. Then you will start to see condensation and mould growth. If you keep the rooms reasonably warm and you have materials capable of absorbing excess moisture, then I don't think condensation is ever going to be a serious problem. Misting mirrors doesn’t count as serious.

I am not so stupid as to believe that my homemade experiments constitute serious scientific investigation, but they are interesting to my mind because they are reasonably consistent and they indicate that something is amiss with our conventional understanding of the issues. If my pet theory is right, then we are guilty of over-ventilating, in order to remove a suspected hazard (excess water vapour) which seems to be largely self-regulating. In the short term, this is not a subject that is likely to get heavily researched because there isn’t a product or group of products out there waiting to be sold. Unless someone comes up with one. Anyone for vapour permeable wall tiles?

5 Jul 2007

More on Polish Builders

When I last wrote about Polish bulders, it was mostly in glowing terms. However, I did add a warning note: Doubtless there will be a few Polish rip-off merchants and quite a few useless Polish builders, just as there are with all ethnic groups, in all walks of life.

As if to bear this out, an unhappy story comes to my attention today, also emanating from Edinburgh, although I think this is mere co-incidence.

The moral is this. Don’t suspend all your critical faculties just because the builder comes from Poland and looks to be cheap. Not everyone born in Poland is a saint. And, despite what my previous story was advocating, try not to pay cash upfront. I know it’s easier said than done, but most building horror stories have the phrase cash upfront somewhere in the telling of the tale.

3 Jul 2007

How should we Handle Humidity?

I still hear the old canard that 80% of our body weight is made up of water. I remember hearing it back at school and I’ve had it repeated to me by my children, so it feels like it’s still doing the rounds. Actually, that fount of all knowledge, Wikipedia, reckons it’s rather less, around 55% for men and 51% for women (more fat). I am not going to argue. It’s perhaps not 80% but it’s still a hell of a lot of water.

What you don’t so often hear — in fact just about never — is what proportion of your home is made up of water. I am not talking about water in the pipes and in the hot water cylinder and various tanks: I am referring to water bound up in the fabric of the house. There’s a surprising amount: nothing like the 50-odd% that exists in the human body but very possibly around 10% of the mass of a house will be made up of bound-water. Timber, for instance, has a moisture content which varies from as little as 5% (incredibly dry) up to over 30% (dripping wet), but often tends to settle down in a centrally heated house at around 10%. Masonry materials, even concrete, are hygroscopic to a surprising extent and can take on and release moisture according to conditions. You only have to drop a brick in a bucket of water to see the effect it has on its weight.

The fact is that a detached house, which can weigh anything between 50 and 200 tonnes, depending on size and construction methods (and that’s excluding all the foundations), could be holding as much as 10 tonnes of bound water within the walls, floors and roofing, and a lot more within the fixtures and fittings as well.

What does 10 tonnes of water look like? Due to the miracle of metricated measurements, 10 tonnes of water turns out to be 10m3 in volume, about the size of a small bedroom, or perhaps 70 bathfulls, if you prefer that. It also turns out to be 10,000litres, which is the amount of water a typical household uses in about two weeks, or around 1500 flushes on a 6lt low flush toilet.

All this bound-water doesn’t have to stay bound. When conditions dictate otherwise, it can either absorb more water or it can release water via evaporation. This does rather depend on the surfaces surrounding the materials: some are very water permeable, others are not. Exactly how much water transfers between the solids in the house and the air in and around it is unknown - it’s never been measured, as far as I know – but it’s likely to be fairly substantial. If it amounted to a change of just 1% of water by weight, we would be talking about 100 litres of water.

Now on a typical day in the life of a detached house, there is usually between 2 and 4 litres of water vapour suspended in the internal air. Take a house with a floor area of 160m2 (comfortable 4-bedroomed job): it will have around 400m3 of conditioned (heated) air space within. In winter, this will be kept at something like 20°C and 50% relative humidity, which should hold around 9gms water vapour/m3. That equates to 3.6kg or 3.6litres for the whole house. If the relative humidity increases above 75%, you start to notice the atmosphere becoming uncomfortably fuggy and if it gets much higher than this you start to see condensation on hard, cold surfaces, typically glass in windows. Indeed, persistently high relative humidity levels at whatever temperature tend to cause all manner of nasty problems connected with condensation.

A typical household will also be producing water vapour during their day-to-day activities. Humans will give off between 0.5 and 1lt per day each, animals slightly less. Cooking, washing and showering also contribute. In fact you might expect around 5 to 10 litres of water vapour a day to emanate from human activity in a typical working house. It’s still a pretty paltry amount, but it has to be dissipated because if it’s allowed to build up without check, the relative humidity will reach dangerous levels. In fact, our domestic ventilation strategies are predicated on the fact that the No 1 enemy is water vapour. If water vapour is kept at reasonable levels, then all the other concerns like cooking smells, off gassing from solvents, body odour and carbon monoxide poisoning will take care of themselves.

This is the way your winter ventilation strategy is worked out. The external air (let’s say it’s 5°C and 90% relative humidity, it often is) holds around half the amount of water vapour per m3 than the internal air (20°C and 50% RH). The maths is a little complex because warm air takes up far more water vapour than cold air and though the relative humidity levels make it look like there is less humidity in the warm house, the absolute humidity levels tell a different story.

Because the water vapour is floating around in the air, if you swap the internal air for some external air, then you will also be swapping the water vapour levels as well. You are basically sucking water vapour out of the house.

Diffusion is ignored in all this. The fact that there is over a thousand times more water bound up inside the building than there is floating around in its airspace just doesn’t come into the equation, despite the fact that everyone agrees that moisture levels within a building are constantly changing. Doesn’t it seem strange that we should spend so much effort and energy expelling 10 litres of water vapour a day from our homes, when they are 10,000 litres of water already sitting in the fabric?

There are alternative water vapour management strategies out there. The best established one hails from Germany and it consists of fitting highly permeable materials to be used as a reservoir to store moisture, with a view to letting it be evaporated back inside when conditions allow. In Germany, it is seen as part of the Building Biology movement and they regard the use of humidity-buffering materials as one of their key principles. Needless to say, they regard the use of mechanical ventilation as an anathema. A lot of building scientists regard the Baubiologists as cranks, but there was some independent testing of their humidity buffering principles carried out in Canada in 1997 by Straube and Burnett which found that what they called the Dynamic Hydric Response of a wood wool board (Durisol) was excellent. They found that when the relative humidity in the room was increased from 30% to 70%, the Durisol responded by absorbing 7% of its dry mass weight. Straube and Burnett worked out that in a typical situation where humidity was rapidly increased from around 50% RH to 80% RH, the extra water vapour could easily be absorbed by the Durisol board.

It’s not a property exclusive to Durisol. They looked at the water vapour permeability of a whole range of products and estimated the following sorption ratings:

• Plasterboard painted with emulsion - score 40
• Concrete, unfinished – score 90
• Brick, natural finish – score 110
• Softwood, unfinished – score 150
• Strawbale behind lime plaster – score 240
• Durisol board behind lime plaster – score 250

They reckoned that anything with a score of 50 or higher would work as a humidity buffer. They also pointed out that such walls work automatically, don’t break down and require no energy to operate. Unlike mechanical ventilation, of course. Another issue with mechanical ventilation, which is seldom touched on, is that it won’t work consistently in all spaces: there are places within rooms — the classic one being ‘behind the wardrobe’ — which remain largely stagnant and simply never get ventilated. Humidity buffers work by diffusion and don’t require air movement to operate effectively.

The proponents of humidity buffering don’t suggest that it becomes a replacement for ventilation, rather that it’s much more efficient at removing excess humidity from the air inside a house and that this should in turn reduce the requirement for current ventilation strategies. Now take the process one stage further and reduce or remove materials from the house which off gas or contain solvents, and remove the threat of carbon monoxide by having no gas burning indoors, and you have a home where ventilation at half an air change per hour is simply uncalled for.

This way of building in fact brings about an alignment of the interests of the natural building materials crowd and the energy efficiency tyros, two standpoints which have been traditionally been divided over the issue of how to best ventilate a house.

On a personal note, I am hoping that the house we are planning to build next year with Baufritz will be able to push the boat out a little and to explore some of these humidity buffering strategies. Baufritz already use them in the homes they build in Germany but have so far run into a wall of blinkered red tape in the UK. “If it’s not in Part F, you can’t do it” seems to be the mentality here. Maybe with a little coaxing, they will allow us to experiment. I’d like to build a house without mechanical ventilation, without trickle vents and without extract fans, just to prove that it can be done and that indoor air quality won’t suffer and that energy efficiency won’t be compromised. Will it be possible? Watch this space.